Bitaxe Supra 401 Installation

31-05-2024 20:54
Bitaxe Supra 401 Installation

Bitaxe Supra 401 BM1368 Installation Instructions


Simple Setup via WLAN and Web Browser
Simply connect your Bitaxe Supra 401 Miner to your network via Wi-Fi and easily set it up via the user-friendly web interface in your browser.

The entire installation takes only 2 minutes and is truly a breeze.

You can watch everything comfortably via your web browser on your computer or mobile phone. Just configure Wi-Fi, enter your Bitcoin address and you are ready to go.

Installation Instructions

Step 1: Unbox and Inspect Bitaxe 401 Supra

Unbox your Bitaxe Supra (1368) and make sure all components are present and undamaged.

Components Include

Bitaxe Supra 401 (1368) device.

5V power supply (Included in the package)

Two-legged unassembled stand for Bitaxe 401 supra.

Step 2: Place the Device in the Standing Box

Mount Bitaxe Supra 401 on two feet using screws.

Step 3: Connect the Power Supply Adapter

Connect Bitaxe Supra 401 to the power outlet for electrical power supply with the included 5V power supply.

Important: Do not use a non-approved power supply as it will permanently damage the device.

Step 4: Turning on the Power Supply after Electrical Connection

Turn on your Bitaxe Supra 401 hardware after connecting it to the power supply.

On first boot, Bitaxe Supra 401 will try to connect to a Wi-Fi network that it assumes it cannot find.

Step 5: Connect to Bitaxe WiFi Access Point

Use a WiFi-enabled device (like a phone or laptop) to search for the new WiFi Access Point named Bitaxe_XXXX.

Connect to Bitaxe SSID.

Step 6: Access AxeOS Web Interface Portal

Once connected, you should be automatically redirected or directed to the AxeOS web portal.

If you are not automatically redirected to the AxeOS web interface portal, open your web browser and visit http://192.168.4.1.

Step 7: Configure WiFi Settings

In the AxeOS web portal, click on the 'Settings' button/tab.


Enter the WiFi SSID and password for your local WiFi network.

Important Note: Your Bitaxe Supra 401 hardware is not compatible with 5GHz WiFi; it only works with 2.4GHz WiFi.

Double-check the WiFi SSID and password before entering it to avoid manual recovery later.

Step 8: Update Bitcoin Mining Pool Settings

In the AxeOS web portal, update the Coin pool URL, port and user to your preferred mining pool.

Recommended Coin Pools

ckpool

publicpool

Step 9: Save Settings and Restart Bitaxe Supra 401

Click Save, then click Restart to apply the changes.

Step 10: Start the Epic Bitcoin Mining Scratch

If everything is configured correctly, your Bitaxe Supra 401 hardware will start mining within seconds.

You can watch the English video below for the installation of your Bitaxe Supra Series hardware.



IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.